This is the 28" version of our LM-300.This mount can be installed in just a few minutes as long as you have access to the seat rail mount on the passenger or drivers seat. Just loosen the bolt, slide the metal bracket that comes with this mount under the seat rail mount and tighten back down.The shaft is made of an aluminum rod so you can adjust it to get the perfect view of your Yaesu transceiver.You can attach our 4 holes amps adapter plate to the remote head bracket that comes with the remote kit from Yaesu. You will need the YSK-7800 for the FT-7800 or FT-7900, the YSK-8900 for the FT-8800 and the FT-8900, and the YSK-857 if you have the FT-857 for this set up to work. Please note these remote brackets are not included with this offer.
Strong yet flexible aluminum mount recommended for service vehicles and trucks
Compatible with GPS, cameras, and other devices having a 4-Hole AMPS pattern
28-inch gooseneck and swivel ball provide ideal positioning of device
2 year limited warranty
This mounting pedestal is ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. Formerly an industry standard, the 4-Hole AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm by 38.05mm (measured as the center-to-center distance between holes). The car seat rail mount is made of strong yet flexible aluminum, and is ideal for service vehicles, trucks, or those who need easy access to their devices but prefer mounting them somewhere other than the windshield or dashboard. Use a socket wrench to install the mount to the car’s seat rail. Loosen the passenger seat track bolt, insert the included seat track bolt bracket (2 different brackets are included for various seat rail configurations), and then retighten the bolt. Bend the 28” gooseneck and rotate the swivel ball adapter head for 360-degree rotation for exact positioning of the device.
- Diameter: "
- Height: "
- For details on our flat rate shipping, check out our shipping page
Frequently Asked Questions
We design mounting solutions to attach to different parts of a vehicle in which we do no not need to drill a hole. Mounting solutions like our seat bolt mount that attaches to the passenger seat bolt, or cup holder mount or vent mounts etc. If you dont care about drilling it down, we offer those mounts as well.
Most of our mounting solutions are based around a ball design. This allows for 360 degree movement so you can get the perfect view angle of your device.
We offer adapters for any Amateur radio and most commercial radios on the market today. In some cases you will need the manufactures remote head bracket for our mount to work. We offer holder for smart phones and tablet with our without the case that will attach to all of our mounts.
We manufacture a majority of our mounts and adapters in the United States and Taiwan.
What our community is saying about our products
I have 4 of these. 3 are used to hold the front part of my amateur radios. This last one holds the remote control for my snow plow on front of pickup. One had operation with remote. This mount locks into the cup holder very tight and strong. Excellent product and very tough.
Great mobile mount your TH-F6a UHF/VHF Transceiver! I use this LM-801EXP to mount my Kenwood TH-F6a transceiver in my vehicle. Ergonomic, easy to use, and solidly built!
I’m using this with my FTM-100. It works great and keeps the control module very secure. It’s also very affordable for the quality of product you get.